REMINDER: Siteowner has no obligation to monitor the Forums. However, Siteowner reserves the right to review the Materials submitted to or posted on the Forums, and remove, delete, redact or otherwise modify such Materials, in its sole discretion and for any reason whatsoever, at any time and from time to time, without notice or further obligation to you. Siteowner has no obligation to display or post any Materials provided by you. Siteowner reserves the right to disclose, at any time and from time to time, any information or Materials that Siteowner deems necessary or appropriate to satisfy any applicable law, regulation, contract obligation, legal or dispute process or government request. To further read the rules and terms of agreement of this Forum, click here.


General Discussion >> Design Forum

Pages: 1 | 2 | >> (show all)
bennion
Legend (inyourownmind)
**

Reged: 03/04/06
Posts: 193
big guy quiver thread.
      #1168218 - 03/12/07 12:27 PM

Calling all larger surfers( 190 pounds+) to share your quiver.

Me:6'2 205 pounds. my bare bones quiver-
6'6-22-3 funshape by barry deffenbaugh.
6'3-20-2.5 speed demon 2
6'6-19.5-2.5 narrow squash thruster on the way.


Post Extras: Print Post   Remind Me!   Notify Moderator  
20W-50 and blood
Duke status
**

Reged: 02/04/04
Posts: 16854
Loc: SOCAL
Re: big guy quiver thread. [Re: bennion]
      #1168253 - 03/12/07 02:37 PM

will post later...i've got a few things ot say as far as this goes...lol

--------------------
Jesus was Mexican, Ronald Reagan was the devil, and the government is lying about 9-11.


Post Extras: Print Post   Remind Me!   Notify Moderator  
pickles
Miki Dora status
***

Reged: 08/18/03
Posts: 4923
Loc: Ventura, CA
Re: big guy quiver thread. [Re: bennion]
      #1168265 - 03/12/07 03:01 PM

Me: 6'4", ~220lbs, 29 years old, in good shape, over a decade of experience.

I ride, ordered by length:

5'10" x 21.5 x 2.5 Klaus Jones twin keel. Good for spicing up an otherwise boring small wave session, but also very fun in good waves up to about 8 feet. Perfect for hard offshores since it doesn't get held up.

6'5" x 19.5 Mayhem SD2s. Squash tails. The polys are 2.5" thick and the XTR is 2 3/8". An older poly with glass ons is my current daily driver. I've also got a "retired" magic SD2 thats about 3/4" shorter and 1/4" narrower than my current ones ... from when I lived in HI and weighed 205. Its still magic, despite the extra weight I put on it these days.

6'6" x 19.5" Mayhem Whiplashes. Same thickness as the SD2s. My good wave boards, which I have not ridden during this awful "winter" we just suffered through. I've got a roundtail I had made just for epic point surf, which is unwaxed and that depresses me more than I can express in words. The others are squash.

Older 6'7" Mayhem proformance squash. Good step up board, great paddler. Awesome for connecting the dots in healthy sized surf. Rarely ridden in CA.

7'2" Mayhem semigun. 19.5 x 2 3/4" I think. Ridden once, went great. Would REALLY like to get some more water time on this guy, but I havn't even gotten my 6'6"s wet this year, let alone!

8'0" Carvin Gun. 19.5 x 2 7/8 ish IIRC. Haven't ridden this since I've been back on the mainland, but this board always worked well in long period juice double and a half overhead + up to my limit somewhere around 10' backs.

10' cooperfish mello yello modelo. No leash. Paddles and surfs like a brick $hithouse, and I love it. Turns a waist high wave into a harrowing experience. I've had it in shoulder high hollow point surf and not only did taking off get my heart racing, I also got barreled.

--------------------
No longer accepting offers to surf for money.


Post Extras: Print Post   Remind Me!   Notify Moderator  
choch
Legend (inyourownmind)
**

Reged: 01/11/04
Posts: 251
Re: big guy quiver thread. [Re: bennion]
      #1168274 - 03/12/07 03:59 PM

6'1", 205, 34

6'4" Rainbow Speed Dialer 21 x 2 3/4
6'4" Stamps Quad Fish 21.5 x 2 7/8 , EPS
6'5" Stamps Keel Fish 22 x 3
6'6" MR quad 21 1/4 x 2 7/8
6'8" Stamps BGT, 21 x 2 7/8, full nose + round tail, EPS
7'0" Lopez Swoopa, 20.5 x 2 3/4, travel board
9'6" Harbour/stamps Trestle Special
10' Harbour/stamps Rapier


Post Extras: Print Post   Remind Me!   Notify Moderator  
albumatt
Michael Peterson status
***

Reged: 10/06/05
Posts: 1796
Loc: san clemente, ca
Re: big guy quiver thread. [Re: bennion]
      #1168279 - 03/12/07 04:17 PM

Me - 6'2" 195lbs, 30 years old surfing for 20 years . . .

• 5'8" x 20.5" x 2.5" Album Twin Keel fish, poly

• 5'10" x 20.25" x 2.5" Album Speeddialer style Quad, poly

• 6'0" x 19.875" x 2.5" Album Quad, swallow tail, poly

• 6'2" x 19.5" x 2.5" Album quad, double wing, rail channels, poly

• 6'3" x 19.5" x 2.5" Album Whip model thruster, Eps/Epoxy

• 6'4" x 19.25" x 2.5" Album quad, rail channels, poly

• 6'8" x 19.25" x 2.5" Album whip Model Step up Thruster, poly

That's it at the moment -

albumsurf.com
album surf blog - boards for sale

--------------------
albumsurf.com
album blog


Post Extras: Print Post   Remind Me!   Notify Moderator  
stu dog
Duke status
**

Reged: 01/15/03
Posts: 21758
Loc: CA
Re: big guy quiver thread. [Re: choch]
      #1168280 - 03/12/07 04:19 PM

me: 6'2" & 225lb-ish (depending on how many days I get in at the gym)

my main boards for So-Cal. I can never remember the width & dimensions, but they're all >= 20" and 2 5/8"
6' swallow tail tri-fin hybrid fish
6'2" single wing 2+1
6'4" swallow tail tri fin (my step up board)
6'6" rounded pin tri fin (don't ride too much)
6'6" double wing swallow tail tri fin (normally take it out in 6' to 8')
7' rounded pin tri fin (8'+ days)
7'6" rounded pin tri fin (haven't ridden it in years as I try to ride the 7'er in big So-Cal days)
9'1" tri fin longboard

Edited by stu dog (03/12/07 04:19 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
pjp
Grom


Reged: 11/17/05
Posts: 113
Loc: San Diego
Re: big guy quiver thread. [Re: bennion]
      #1168303 - 03/12/07 05:35 PM

5'10 198

6'6 x 20 1/2" x 2 7/8" Old School Maui & Sons Thruster from the 80's
6'8" x 21" x 2 3/4" Bessell Quad Eliminator
9'0" x 22" x 3" Triple stringer TDK Longboard


Post Extras: Print Post   Remind Me!   Notify Moderator  
offroute
Legend (inyourownmind)
*

Reged: 02/20/04
Posts: 543
Loc: San Clemente
Re: big guy quiver thread. [Re: pjp]
      #1168332 - 03/12/07 09:27 PM

6'0" 215

Pavel Speeddialer 6'0" x 20.5 x 2.75
Bulkley XTR POD Quad 6'0" x 21.5 x 2.70
Bulkley B4 Swallow Tail Quad 6'4" x 20.25 x 2.65
Bulkley Round Tail "Hipster" Quad 6'4" x 20 x 2.70
Channel Islands MSF 6'5" x 20.5 x 2 7/8
Bulkley Round Tail "Hipster" Quad 6'6" x 20 x 2.70
Chuck Burns Noserider 10' x ?? x thick


Post Extras: Print Post   Remind Me!   Notify Moderator  
CAtoFLtoCA
Gerry Lopez status
**

Reged: 08/10/06
Posts: 984
Loc: N. County SD
Re: big guy quiver thread. [Re: offroute]
      #1168335 - 03/12/07 10:03 PM

Me = 6'3", 205 lbs(ish), surfing for 12 years, although
you wouldn't be able to tell if you watched me.

6'0" Hynson Twinzer (no dims noted, but I'd say around
21" x 2 3/4ish)...LOVE this board.

6'4" x 20 1/4 x 2 1/2 Rich Wisz swallow-tail quad...super
fast and fun in punchy surf, not the best in mush though.
Hasn't gotten much love since I picked up the twinzer, but I look forward to taking it out again this week.

6'6" MSF G2...very fun board to change things up on a clean
day with some waves.

6'8" x 19 1/4 x 2 5/8 Bulkley swallow-tail thruster that's
actually pretty gunny in the nose...good for bigger surf...
coming to Peru with me next month.

9'8" x 23 x 3 Cobalt round-pin log...works in ankle slappers
up to overhead.

--------------------
Forever Stoked!!


Post Extras: Print Post   Remind Me!   Notify Moderator  
R_surf
Legend (inyourownmind)
**

Reged: 08/23/06
Posts: 426
Loc: S. Cali , US
Re: big guy quiver thread. [Re: offroute]
      #1168338 - 03/12/07 10:49 PM

Height: 6'2" Weight: 195lbs
I don't have nearly the arsenal some of you have but here it is..
Zamora Flex Tail Quad: 5'11" x 20.75 x 2 5/8" (I Believe)
...Lost SD II XTR: 6'4" x 19 1/4 x 2 7/16
Proctor Groveler IV. SW: 6'6" x 19 5/8 x 2 9/16" (I Believe)
That's all for the moment...


Post Extras: Print Post   Remind Me!   Notify Moderator  
importheinekin
Nep status
*

Reged: 04/13/06
Posts: 859
Loc: Newport
Re: big guy quiver thread. [Re: bennion]
      #1168339 - 03/12/07 10:50 PM

5'9 and 195 pounds for me.

6'1x19.75x2.63 ...Lost SD2
5'10x20.25x2.5 ...Lost Shark
5'11x19.75x2.5 Terry Senate Quad (Stretch Style)
5'5x21x2.5 ...Lost Round Nose Fish Quad
5'5x21.5x2.5 Rich Wisz Round Nose Fish Tri-Fin
6'0x20x2.5 Terry Senate Thumbtail
9'4 Robert August Wingnut Longboard


Post Extras: Print Post   Remind Me!   Notify Moderator  
SouthCoastSurfer
Michael Peterson status
**

Reged: 02/23/07
Posts: 1931
Re: big guy quiver thread. [Re: importheinekin]
      #1168342 - 03/12/07 11:00 PM

6'3" 200lbs

6'8" x 2.60" x 20.2" SouthCoast / Preisendorfer Squash Tail
6'10" x 2.5" x 19.75" SouthCoast / Ricci Rounded Pin Tail
6'2 KG / Kenson Twinzer Fish


Post Extras: Print Post   Remind Me!   Notify Moderator  
20W-50 and blood
Duke status
**

Reged: 02/04/04
Posts: 16854
Loc: SOCAL
Re: big guy quiver thread. [Re: SouthCoastSurfer]
      #1168345 - 03/12/07 11:08 PM

5'11, 230 lbs....wait...231 lbs, i just finsihed drinking
6'1 Barry V. quad fish
6'3 Bulkley B4

and a 6'6 barry v thruster

--------------------
Jesus was Mexican, Ronald Reagan was the devil, and the government is lying about 9-11.

Edited by 20W-50 and blood (03/12/07 11:11 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
shakadelic
Michael Peterson status
**

Reged: 11/24/05
Posts: 1932
Loc: Eurocoasting
Re: big guy quiver thread. [Re: 20W-50 and blood]
      #1168361 - 03/13/07 12:45 AM

post up some pictures of said boards

--------------------
ride the barrel and get pitted, so pitted !


Post Extras: Print Post   Remind Me!   Notify Moderator  
Vibe_Kong
Legend (inyourownmind)
**

Reged: 11/16/04
Posts: 187
Loc: SD
Re: big guy quiver thread. [Re: bennion]
      #1168487 - 03/13/07 09:38 PM

6'3 220 pounds.
6' x 20.5 x2.4 hynson twinzer fish.
6'4 x 19.5 .2.5 flyer
6'7 x19.25 x 2.4 swallow tail tri
7'4 x 19.4 x 2.6 round pin semi gun


Post Extras: Print Post   Remind Me!   Notify Moderator  
Tanner
Miki Dora status
**

Reged: 07/30/03
Posts: 5088
Loc: Point Loma
Re: big guy quiver thread. [Re: Vibe_Kong]
      #1168491 - 03/13/07 10:12 PM

Short wide guy - 5'8/185-195lbs depending on how many burritos I eat in a week.

5'10 x 20 1/4 x 2 5/8 Griffin Quad Fish

5'11 x 21 x 2 5/8 Pavel Speed Dialer

6'0 x 21 5/8 x 2 5/8 Chris Darby Twin Keel Fish

6'0 x 21 x 2 3/4 Firewire Futura

6'2 x 20 x 2 5/8 Malcolm Campbell Bonzer Egg (5 fins)

6'2 x 20 1/4 x 2 3/4 Lance Collins/Wave Tools Jeff Parker Model twin fin (on the way)

6'6 x 20 1/4 x 2 3/4 Hank Warner single fin (on the way)

6'9 x 20 x 2 3/4 Choice thruster by Rich Pavel (with balsa fins)

6'10 x 20 1/4 x 2 3/4 Doc Lausch single fin

9'0 x 22 x 3 Gordon and Smith Single fin

--------------------
'I just play, without thinking.' - Ace Frehley


Post Extras: Print Post   Remind Me!   Notify Moderator  
Tanque
Legend (inyourownmind)
**

Reged: 06/02/06
Posts: 294
Loc: 619
Re: big guy quiver thread. [Re: Tanner]
      #1168836 - 03/15/07 11:58 AM

6'3" and 240-245 lbs (looks like I take the cake, I played college football and really am not that fat)

6'4" x 22 x 3 Free Spirit Quad Fish (going to downsize soon, too big)
6'8" x 20.5 x 2.75 EPS Bulkley Roundtail
7' x 20.5 x 2 7/8 Schneider Swallowtail step up
8' x 19 7/8 x 2 7/8 Stewart Gun (picked her up in January on the North Shore and we fell in love so I brought her home. She changed my life in 6-7' Hawaiian surf)

After getting the Bulkley in December, I don't know if I can ever get another from anyone else.


Post Extras: Print Post   Remind Me!   Notify Moderator  
BigOldScab
Grom
*

Reged: 10/15/06
Posts: 150
Loc: St. Augustine, FLA
Re: big guy quiver thread. [Re: Tanque]
      #1168943 - 03/15/07 04:00 PM

I beat ^….I’m 6’1” 251, 39 years young, also in shape, played coll. football, and from the dirty south.

-7’2” x 22.5 BPC quad/speed dialer
-7’4” x 22 Rozo Swallow-tail thruster
-7’5” x 21.5 BPC 5 fin bonzer
-7’9” x 39 Rozo speed egg
-10 x 24 x 3.75 Warrior retro step deck
-10’4 x 23 x 3.5 Rozo triple stringer

--------------------
The perfect combination of redneck and beach bum!


Post Extras: Print Post   Remind Me!   Notify Moderator  
squeekie
Michael Peterson status
**

Reged: 04/27/06
Posts: 2127
Loc: Capistrano Beach,CA
Re: big guy quiver thread. [Re: bennion]
      #1168953 - 03/15/07 04:15 PM


6' 245 lbs 56 yrs


10' 2" X 24" X 4" Infinity Cluster Single fin.


--------------------
Ward, weren't you a little rough on the Beaver last night?


Post Extras: Print Post   Remind Me!   Notify Moderator  
tom@daumtooling
Michael Peterson status
***

Reged: 01/10/02
Posts: 2708
Loc: San Clemente
Re: big guy quiver thread. [Re: BigOldScab]
      #1168961 - 03/15/07 04:31 PM

Okay, I'm just under your weight threshold. But, I make up for it in height. I'm 6'5" and 185 lb.s at 45 years.
My quiver:
6'2" O'Keefe Fish Quad-1/2 pound EPS with 3 ounce Impact glass and spheretex epoxy deck. It's been my LokBox Quad test driver and works great until the waves get critical.
(2) 6'5" 19-7/8" O'Keefe Squash Tail Thruster-Ones a P/U P/E and the other a P/U epoxy both were test drivers for our thruster setups.
6'6" Malcomb Campbell 5-Fin Bonzer-The board is awesome in the steep and deep.
6'10" O'Keefe Semi-gun thruster when my Bonzer gets dinged this one fills the slot.
7'4" Channel Islands channel bottom gun-I've had it since 1983 and it's pure nastalgia for me.
8'10" O'Keefe Rhine Chaser- It's been a while since I've needed to pull this puppy out.
9'6" O'Keefe Longboard-My daughter has pretty much laid claim to this board. But, if it's micro, it's a fun board to run down to San-O with.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Greg Griffin
Phil Edwards status
**

Reged: 10/31/04
Posts: 7002
Loc: Sunset Point, Hawaii
Re: big guy quiver thread. [Re: BigOldScab]
      #1168963 - 03/15/07 04:34 PM

This one is 7'6" x 22" x 3 1/8"
[image][/image]

This one is 7'4" x 21 3/4" x 3 1/8"


[image][/image]

Say hi to Rozo for me Greg.

--------------------
www.griffinsurfboards.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
BigOldScab
Grom
*

Reged: 10/15/06
Posts: 150
Loc: St. Augustine, FLA
Re: big guy quiver thread. [Re: Greg Griffin]
      #1168981 - 03/15/07 05:37 PM

Nice! That's a lot like the thruster Dickie shaped for me except mine is yellow . Rozo is fantastic. I'll tell him! http://www.rozosurfboards.com/

--------------------
The perfect combination of redneck and beach bum!


Post Extras: Print Post   Remind Me!   Notify Moderator  
Greg Griffin
Phil Edwards status
**

Reged: 10/31/04
Posts: 7002
Loc: Sunset Point, Hawaii
Re: big guy quiver thread. [Re: BigOldScab]
      #1168993 - 03/15/07 05:57 PM

Tell him not to drink anymore catalyst.

--------------------
www.griffinsurfboards.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
Dawn_patrol
Michael Peterson status
***

Reged: 04/17/06
Posts: 2411
Loc: HB
Re: big guy quiver thread. [Re: bennion]
      #1169044 - 03/15/07 09:51 PM

I'm just in there. 6' 190 lbs. In shape.

5'8" x 21 x 2-5/8 Quad Fish by Barry Vandermeulen EPS (sick)
6'2" x 19.5 x 2.5 CI Flyer
6'4" x 19.25 x 2.5 Barry V Thruster (For good waves)
6'9" x 19.25 x 2-9/16 Semigun Round Pin by Barry V
7'6" x 19-3/4 x 2-3/4 CI Gun (Shaped by Al)
And my newest:
6'3" x 19.75 x 2.5 Quad Roundtail EPS by Bulkley


Post Extras: Print Post   Remind Me!   Notify Moderator  
Tanner
Miki Dora status
**

Reged: 07/30/03
Posts: 5088
Loc: Point Loma
Re: big guy quiver thread. [Re: Dawn_patrol]
      #1169049 - 03/15/07 10:05 PM

Short/Wide Guy, here - 5'8 and anywhere between 185 - 195 lbs.

5'10 x 20 1/4 (I think) x 2 5/8 Griffin 4/5 Finner

5'11 x 21 x 2 5/8 'Speed Dialer' by Pavel

6'0 x 21 5/8 x 2 5/8 Twin Keel Fish by Chris Darby

6'0 x 21 x 2 3/4 Firewire 'Futura' by Nev

6'2 x 20 1/4 x 2 3/4 Wave Tools Twin Fin (Jeff Parker Model) by Lance Collins (on the way)

6'2 x 20 x 2 5/8 Bonzer 5 Fin Egg by Malcolm Campbell

6'6 x 20 1/4 x 2 3/4 Single Fin by Hank Warner (on the way)

6'9 x 20 x 2 3/4 Choice Thruster by Pavel (balsa fins)

6'10 x 20 1/4 x 2 3/4 Single Fin by Doc Lausch

9'0 x 22 x 3 single fin G&S longboard by Chris Darby

--------------------
'I just play, without thinking.' - Ace Frehley


Post Extras: Print Post   Remind Me!   Notify Moderator  
surferguy800
Gerry Lopez status
**

Reged: 10/20/05
Posts: 967
Loc: SantaBarbara
Re: big guy quiver thread. [Re: bennion]
      #1169078 - 03/16/07 12:35 AM

6'1 215 lbs.

5'10 winged pin bonzer 3 (dont ride often)
6'1 winged thumbtail singlefin/bonzer 3
5'11 x 22 flextail fish
6'8 displacement hull
6'8 quad egg
8'0 pintail...thing, big wide...thing, singlefin
6'4 Bing Bonzer (1973)
6'4 twinzer fish
9'6 pintail log
9'2 squaretail mini-log...sapling?

soon:
9'7 squaretail noserider
6'4 wide diamond/squash modified fish template thing

all made by me other than the Bing

--------------------
----

www.rlovelace.com

----


Post Extras: Print Post   Remind Me!   Notify Moderator  
Tanque
Legend (inyourownmind)
**

Reged: 06/02/06
Posts: 294
Loc: 619
Re: big guy quiver thread. [Re: surferguy800]
      #1169164 - 03/16/07 11:27 AM

I had a 6'10" Rozo about 10 years ago, Yellow roundpin. I loved that board. I called her Doctor Rozo, I like to name all my boards.

Post Extras: Print Post   Remind Me!   Notify Moderator  
ciscojaws
Nep status
**

Reged: 07/28/08
Posts: 849
Loc: San Diego
Re: big guy quiver thread. [Re: Tanque]
      #1876878 - 09/04/10 01:41 PM

5'11 x 235ish

6'0 x 21 x 3 CI Fishcuit
6'6 x 20 x 2.75 Sharpeye Glider


Post Extras: Print Post   Remind Me!   Notify Moderator  
Blacks
Legend (inyourownmind)
***

Reged: 02/08/09
Posts: 444
Loc: East Coast, Great White North
Re: big guy quiver thread. [Re: ciscojaws]
      #1876880 - 09/04/10 01:57 PM

5'11" x 205ish lbs. (with suit/boots/gloves) 37 yo

5'10 x 21.5 x 2.77 Neilson Flying Floaty Fish (EPS/epoxy quad)

5'10" x 21 x 2 11/16" Stamps Quantum Fish (EPS/epoxy quad)

5'10" x 20.5 x 2.5 Roberts White Diamond (EPS/Epoxy 5 fin)

6'4" x 20" x 2.5" Neilson Rocket Fish (EPS/epoxy stringerless with bamboo vaneer and carbon fiber rails)

6'6" x 20.5" x 2.5" Neilson Superfly with bat tail (EPS/epoxy quad)

--------------------
Chill
Blacks

Edited by Blacks (09/04/10 04:03 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Retropete
Michael Peterson status
**

Reged: 01/20/06
Posts: 1808
Loc: Sunny Coast Qld Australia
Re: big guy quiver thread. [Re: Blacks]
      #1876907 - 09/04/10 04:10 PM

6'1" 195lbs, 47yrs, surfing 30yrs.
6'X 21" X 2 & 7/8" DVS (Dick Van Straalen) stringerless, volane, hydro hull twin keel with carbon & bamboo sandwich keels.
6'2" X 22" X 2 &5/8" Matt Keane 2+1 hull. Currently with sharktooth siderunner fins out of the 8' all rounder and a 7" fluid foils soul flex fin.
6'4" X 21" X 2& 7/8" Diverse quad fish with either speed dialler or Stretch quad template fins.
7' X 21" X 3" Michael Cundith 7T diamond tail model with FCS bonzer siderunners and 6.5" Bonzer centre fin.
8' Dick Van Straalen carbon fibre/eps all rounder with concave deck and 8" Van Straalen fin.


Uploaded with ImageShack.us

--------------------
Caution: Excessive Kool aid consumption may result in a bitter aftertaste.


Post Extras: Print Post   Remind Me!   Notify Moderator  
ifallalot
Duke status
**

Reged: 12/17/08
Posts: 18396
Loc: Carlsbad, CA
Re: big guy quiver thread. [Re: Tanner]
      #1876951 - 09/04/10 06:23 PM

Quote:

Short/Wide Guy, here - 5'8 and anywhere between 185 - 195 lbs.




Me too, 5'9" and 195-205 built like a tank. I should do roids and look like Ronnie from Jersey Shore. Anyway, here is my current quiver of boards I actually surf
Brownfish handplane and Churchills
6'1" x 21" x 2 3/4" Campbell Bros Bumblebee Bonzer 3
6'2" x 20" x 2 5/8" Album Modtwin
6'3" x 20" x 2.63" Bulkley Hipster Swallowtail Quad

I'm not going to start a wishlist here but I have my ideas. I do know that I'm going to start going smaller

--------------------
the graphics portray the hawks prey battling death


Post Extras: Print Post   Remind Me!   Notify Moderator  
stu dog
Duke status
**

Reged: 01/15/03
Posts: 21758
Loc: CA
Re: big guy quiver thread. [Re: ifallalot]
      #1876988 - 09/04/10 08:17 PM

me: 6'2" 225/30lbs 37 years old and 25 or so years surfing
My primary quiver for 90% of So-cal. Not shown are my longboard, quad-fish, and egg that i'm not using as much right now. All boards shaped by Kyle Bernhardt out of the NS
left to right, as I remember the original orders with my shaper cause they're all resin tints so the dimensions are hard to read and wax on each is buttass old:

6' x 21"-ish x 2 5/8" - believe it's 4oz S-cloth. pretty sure it's 2 years+ old now. mostly use in the winter for up to HH w/ fiberglass JC1's
6' x 21 1/14" x 2 3/4" - believe it's 6oz S-cloth as it's heavier than the other. got it this past april. great board for summer, and mushy surf w/ fiberglass EA's
6'4" x 20" x 2 5/8" - with hemp cloth deck. got it in Feb09. Basically a "Flyer 2" type of board. Road this all of 09/10 winter in 3' to 10' VTA point faces. Switch between AM2 fiberglass and JC1 RTM's when it's big.

looking to replace the first board probably with either a Black Diamond (whatever Roberts calls it now) or a PyzAlien.

Edited by stu dog (09/04/10 08:26 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Bullnutts
Nep status
**

Reged: 11/13/04
Posts: 565
Loc: Hawai'i
Re: big guy quiver thread. [Re: bennion]
      #1877018 - 09/04/10 09:01 PM

LOL. Wouldn't think that 190 is in the big category as most contests have at minimum 225 to be in the "big" division. But then again, doesn't FCS consider 190 and over as large for their fin category? Anyways a 7'10, 8'4, 9'2, and 10'0 all at 23" and from 3 1/4 to 3 1/2. At 6'5/245, i .like flotation but have no problem dipping and turning. May have to try something smaller though - just for laughs.

Post Extras: Print Post   Remind Me!   Notify Moderator  
honkeytonk
Grom


Reged: 10/14/09
Posts: 40
Re: big guy quiver thread. [Re: Bullnutts]
      #1877028 - 09/04/10 09:08 PM

Me 5'11 27 years old 220lbs

5'11x 20x 2 3/4 Barry V quad fish. The board is magic

6'2 x 19 5/8 x 2 3/4 Barry V thruster which is also mental.


Post Extras: Print Post   Remind Me!   Notify Moderator  
20W-50 and blood
Duke status
**

Reged: 02/04/04
Posts: 16854
Loc: SOCAL
Re: big guy quiver thread. [Re: honkeytonk]
      #1877054 - 09/04/10 09:36 PM

your ahemmyahem dims are off

--------------------
Jesus was Mexican, Ronald Reagan was the devil, and the government is lying about 9-11.


Post Extras: Print Post   Remind Me!   Notify Moderator  
pickles
Miki Dora status
***

Reged: 08/18/03
Posts: 4923
Loc: Ventura, CA
Re: big guy quiver thread. [Re: pickles]
      #1877122 - 09/05/10 08:19 AM

Quote:

Me: 6'4", ~220lbs, 29 years old, in good shape, over a decade of experience.

I ride, ordered by length:

5'10" x 21.5 x 2.5 Klaus Jones twin keel. Good for spicing up an otherwise boring small wave session, but also very fun in good waves up to about 8 feet. Perfect for hard offshores since it doesn't get held up.

6'5" x 19.5 Mayhem SD2s. Squash tails. The polys are 2.5" thick and the XTR is 2 3/8". An older poly with glass ons is my current daily driver. I've also got a "retired" magic SD2 thats about 3/4" shorter and 1/4" narrower than my current ones ... from when I lived in HI and weighed 205. Its still magic, despite the extra weight I put on it these days.

6'6" x 19.5" Mayhem Whiplashes. Same thickness as the SD2s. My good wave boards, which I have not ridden during this awful "winter" we just suffered through. I've got a roundtail I had made just for epic point surf, which is unwaxed and that depresses me more than I can express in words. The others are squash.

Older 6'7" Mayhem proformance squash. Good step up board, great paddler. Awesome for connecting the dots in healthy sized surf. Rarely ridden in CA.

7'2" Mayhem semigun. 19.5 x 2 3/4" I think. Ridden once, went great. Would REALLY like to get some more water time on this guy, but I havn't even gotten my 6'6"s wet this year, let alone!

8'0" Carvin Gun. 19.5 x 2 7/8 ish IIRC. Haven't ridden this since I've been back on the mainland, but this board always worked well in long period juice double and a half overhead + up to my limit somewhere around 10' backs.

10' cooperfish mello yello modelo. No leash. Paddles and surfs like a brick $hithouse, and I love it. Turns a waist high wave into a harrowing experience. I've had it in shoulder high hollow point surf and not only did taking off get my heart racing, I also got barreled.




Fun to see a zombie thread come back. I'm 33 now, this is 4 years old! My dims are about the same but I got my latest round of boards a little bigger. I like the new boards a lot so I'm getting ready to sell the old ones that are still around. Still have the fish and the mello, my shortboards are now:

SD2 Ploy 6'5" x 19.75 x 2.56
SD2 Marco 6'5" x 19.75 x 2.56
F1 Poly 6'6" x 19.75 x 2.63



--------------------
No longer accepting offers to surf for money.


Post Extras: Print Post   Remind Me!   Notify Moderator  
WarrenC
Michael Peterson status
**

Reged: 11/30/08
Posts: 2763
Re: big guy quiver thread. [Re: pickles]
      #1877134 - 09/05/10 08:54 AM

interesting thread, always like to hear what other "big" guys are riding
225-230lbs, 40 yrs old
living in FL
surfing most my life

currently riding a 7'0x22.25x3.125 Christenson (sp) lunchbox quad round tail w glassed in 101's and have had it out this past week for its maiden voyages in 6-8 ft faces to thigh high dribble and it has performed superbly in everything and does not have the limitations of a fish plan shape going vert or doing strong cutbacks; it also does not have the "on train tracks" feel that I get personally from many fish;I have only ridden it this week but have been very impressed by its versatility and wave catching ability
super smooth and i can "choke up" on the front half of the board and ride it with no problems in the pocket; I can duck dive it no problem
I had it out yesterday in tiny little surf, thigh high stuff i would only ever longboard and was catching waves from outside to inside until the wave closed out on the sand
I have decided to pursue the more all rounder type boards lately and am very pleased so far with this one, will post pic of it when I can if I get the chance
there's more coming, but this is it for now, and it has delivered so far

--------------------
What fin sets work well with this board.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Haiku
Gerry Lopez status
***

Reged: 12/08/05
Posts: 1023
Re: big guy quiver thread. [Re: bennion]
      #1877170 - 09/05/10 11:29 AM

6'0" 250
6'4"and 6'8" both Cole's
Firewire log


Post Extras: Print Post   Remind Me!   Notify Moderator  
Sanzabar
Legend (inyourownmind)
**

Reged: 02/24/09
Posts: 238
Re: big guy quiver thread. [Re: bennion]
      #1877488 - 09/06/10 05:43 AM

6' x 250 lb x 53 x North Cakalaki

11' Hawaiian Pro Designs by Surftech "Prince Kuhio"
(I don't need nothin else around here)

9' to 9'6" Mc or Tak anywhere else


Post Extras: Print Post   Remind Me!   Notify Moderator  
bobnery
Grom


Reged: 01/02/10
Posts: 65
Re: big guy quiver thread. [Re: Sanzabar]
      #1877717 - 09/06/10 03:52 PM

Down to a two board quiver now.
Me: 6' and go between 190 and 205 depending on season and if I stop cramming food in my face, 40 years old and close to 3 decades in the water, and go anywhere from trunks to hooded 5/4/3 boots and gloves

White Diamond 6'1" 20.75 2.5 EPS
SD2 6'6" 19.75 2.5

and I have a "fluffier" WD on the way same length as above but at 20 7/8 and 2 7/8 in EPS to try a bit more float to hopefully be a bit more competitive with the longboards and funboards that dominate VA


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | >> (show all)



Extra information
12 registered and 47 anonymous users are browsing this forum.

Moderator:  Groundswell, Administrator, TRI FINS ARE DANGEROUS, Nameless60, tenover, r32 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is enabled
      UBBCode is enabled

Rating:
Topic views: 8326

Rate this topic

Jump to

Contact Us | Privacy statement Surfermag.com

Powered by UBB.threads™ 6.5.4